Overview

The Setup Wizard is a utility that will help configure Beyond TV for your particular system. We recommend that new users run the Setup Wizard immediately following the installation of Beyond TV in order to ensure that everything works properly.

Before starting the Setup Wizard, make sure you've done the following:

·

Connected your broadcast source to the TV tuner card in your PC. See Connecting Broadcast Source for more information.

·

If you are using a non-hardware encode TV tuner card without integrated audio, connect your TV tuner card to your sound card. See Connecting Audio Source for more information.

·

Turned your PC speakers on and unmuted your system's audio.

·

Established a "tuning" connection between your external receiver and PC. See Tuning External Receivers for more information.

You can access the Help File at any point in the Setup Wizard by pressing the F1 key.

Note: You can run the Setup Wizard any time after installing Beyond TV 3.5 by launching it from the Windows Start Menu.

Start > Programs > SnapStream Media > Beyond TV 3 > Beyond TV Setup Wizard