Using the included coaxial RF patch cords and amplified splitter, connect your incoming TV source to the SnapStream Enterprise TV Server.
1. Connect your TV source to the "Cable In" connection on the amplified splitter.
2. Connect a cable between each TV tuning connection on the Enterprise TV Server and an output port on the amplified splitter.
3. Connect the DC12V Power Input connector on the amplifiied splitter to a power source.
Note: Each cable connection provides a signal to two tuners. A 4-tuner server will require 2 connections. An 8-tuner server will require 4 connections, etc.
Rackmount case setup:
Tower case setup:
