This section contains hardware setup instructions for serial cable tuning, which is available for select DirecTV systems. For more help with this setup, please see the Quick Start Guide, which is shipped with your Enterprise Server, or Contact Support.
Note: Before beginning this procedure, please make sure that your receivers are set up according to your provider's instructions for normal television reception.
This topic is split into two sections, which should be viewed in order:
Software setup for serial port tuning is performed in the Setup Wizard. NOTE: Normally, software configuration is performed by SnapStream during the testing and burn-in process. You may not need to perform software setup in order to start using the Enterprise TV Server. If you are unsure whether software setup is necessary
