Software Setup and Install the SnapStream Enterprise TV Server

This section contains instructions for the installation and setup of the SnapStream Enterprise TV Server. After completing this section, the SnapStream Enterprise TV Server is ready to use.

Proceed to the appropriate section for step-by-step instructions on setup and installation. Note that these sections should be followed from beginning to end.

·

Satellite or digital cable: Covers setup and installation for digital cable or satellite TV broadcast sources.

·

Regular cable or analog antenna: Covers setup and installation for regular (analog) cable or (analog) antenna broadcast sources.

If setting up multiple tuners, pick one broadcast type above to start with; additional instructions will appear in the appropriate section. If multiple tuners are to record from different broadcast types, begin by setting up the tuner which should be used most often.