|
|
|
| 1. | Open the Beyond Media Basic interface.
|
|
|
| 2. | In the Main Menu, select the Settings option.
|
|
|
| 3. | In the Settings menu, select the Firefly Settings option.
|
|
|
| 4. | You will see the following menu options:
|
|
|
|
|
|
|
|
| On Screen Display
|
| Use the left and right Navigation Buttons to enable (on) or disable (off) the informational messages that appear in the upper right corner of your screen when your send commands from your Firefly Remote. For example, when you press the Mouse button this on-screen display appears.
|
|
|
|
|
|
| Remote Channel
|
| Your Firefly Remote can be programmed to operate on 16 different channels. Each of these channels corresponds to a different radio frequency. By default, your remote is configured to operate on the "all channels" option. If you are using a single Firefly Remote, you won't need to change this setting.
|
|
|
| If you are using more than one Firefly Remote, we recommend that you assign each of your remotes a different channel. Doing this will prevent the various remotes from interfering with one another when they are being used at the same time. Use the left and right Navigation Buttons to assign a particular channel for each remote control and press the OK button to confirm the change. Follow the on-screen instructions to complete the configuration.
|
|
|
| 5. | After setting each option on this screen, scroll up to Back to Settings and hit the OK button.
|
|
|